So a rather heavy box from the fine folks at WildernessEV showed up yesterday with almost all of the components we need to install the motor and controlls. Thought I would share it with you:
 |
| Clockwise from upper left: Capacitance charger, gauge mount, throttle, volt and amp meter, motor mount, heavy (2GA) cable with terminals, cut off switch, assorted bolts, Kelley solid state motor controller and, at center, adapter sleeve to connect propshaft to motor and an amp shunt.. |
Our idea is to create a carrier that will sit athwart the old motor bunks in the boat to hold the motor and controller hardware in place.
 |
| Here, to give you some idea of scale. Here's the controller, motor mount and trrottle. |
So having taken some measurements, I'm off to get some wood and hardware. Still to come is the reversing contactor and a few other hang-y on parts.
Stay tuned.
M
nice
ReplyDelete